Before installation, first check the accessories and their quantities, as well as the position of the power plug. The towel warmer comes with a built-in wire-hiding groove, allowing for left or right wire exit for easy installation.
Installation Steps
1.Locate the position in accordance with the installation positioning diagram, and mark the wall with a marker pen.
2.Drill holes at the marked positions, and install wall plugs in the holes.
3.Pass the screws through the metal sleeves, then screw the screws into the wall plugs at the upper part of the wall.
4.Fit the screws into the base connectors, and screw them into the wall plugs at the lower part of the wall. Make sure the holes are centered.
5.Install the decorative covers on the mounting feet of the towel warmer in advance, then fix the entire towel warmer frame in place.
6.Tighten the set screws on the connectors of the two upper mounting feet.
7.Secure the two lower mounting feet with screws.
After Installation，the position of the double-layer storage rack is adjustable to achieve dry-wet separation. After power is supplied, the towel warmer can be used by simply touching the switch. For any installation or usage problems, please contact the online customer service.